Use 8 holes, spaced 250 mm apart, for plants that are left to spread and harvested whole, and 15, at 125 mm, for seedlings cut early. The key factor is the width a mature plant takes up: two butterhead lettuces at 125 mm will crowd each other well before harvest.

NFT gutter 100 x 50 mm, 2 m long, with its perforated lid and two drainage end caps, exploded diagram

NFT channel 100 x 50 mm, 2 m long in perspective view, lid drilled with 15 holes at 125 mm centres

Drainage end cap for the NFT 100 x 50 mm channel, with its outlet sleeve

NFT growing channels 100 × 50 mm, 2 m length

Name: NFT growing channels 100 × 50 mm, 2 m length
Brand: Growrilla
SKU: GRW-MOD5-DD-8-1
Availability: InStock

29,90 €

9,96 € × 3 with no fees Klarna.

This NFT PVC gutter of 2 metres comes with its end pieces glued on in the factory: drainage on both sides to extend a run, or drainage and cap to terminate it. Its lid is drilled with either 8 holes spaced 250 mm apart or 15 holes spaced 125 mm apart, for 5 cm net pots.

Ref. GRW-MOD5-DD-8-1·NFT hydroponic gutter

Pack size : ×1

×1

Pack of 8

Pack of 16

Lid drilling : 8 holes, 250 mm spacing

8 holes, 250 mm spacing

15 holes, 125 mm spacing

Terminals : Drainage / drainage

Drainage / Drainage

Drainage / End cap

Customer support 7 days a week by email

Delivery within 2 to 15 business days

100 % secure payment

The summary

What it is: a 2 m channel through which a thin film of nutrient solution flows beneath the roots.
What sets it apart: the hole spacing is chosen at the time of ordering — 125 or 250 mm — with a factory-drilled lid.
Two densities: 8 holes spaced 250 mm apart, or 15 holes spaced 125 mm apart.
What you grow in it: lettuces, seedlings, and herbs with a small root ball.

2 m growing channel, 100 x 50 mm profile, 8 or 15 positions to choose from.

This 2 m channel with a 100 x 50 mm profile is ordered with a factory-drilled lid at the spacing of your choice, 250 mm or 125 mm, and that choice determines the crops it can support. It arrives with its end caps glued in place and a net pot of 5 cm per position.

📏 8 holes or 15

At 250 mm centre to centre, the lid provides 8 positions over 2 m. Each plant has a quarter of a metre to spread, which suits a butterhead lettuce grown to full size, a batavia, or a basil harvested over several cuts, as these crops need around twenty centimetres between plants. At 125 mm, the same channel holds 15, tightly spaced, the right density for microgreens, lamb's lettuce, rocket, and herbs harvested young.

250 mm spacing

The channel holds 8 positions over 2 m, for plants that spread out and are harvested whole.

125 mm spacing

The channel holds 15 positions over 2 m, for short cycles, harvested young.

5 cm pots

The holes take 5 cm diameter net pots, at both spacings.

A choice that locks in

The lid comes pre-drilled from the factory: the spacing cannot be changed afterwards.

Germinate seedlings separately before filling the channel

A nutrient film technique channel takes rooted seedlings, not seeds. Peat germination pods hold the seed in their central hole and slip whole into a 5 cm net pot as soon as the roots emerge, within 5 to 10 days. This avoids disturbing the root system at transplanting, and each slot in the channel receives only a seedling that has already germinated.

🔩 The end caps and the run

This channel is the one fitted to NFT systems in the range with a 100 x 50 mm profile, providing 15 planting sites on the 60-plant system. Ordering it separately serves two purposes: replacing a warped or cracked channel, and building a run longer than a standard system provides. Its end caps are factory-glued in one of the two configurations available, so there is no sealing for you to do yourself.

The two ends cannot be ordered at random

The channel comes with its end fittings bonded in the configuration you choose: drainage at both ends when you connect several channels end to end, drainage on one side and a blanking plug on the other when the channel terminates the run. Count your end points before confirming your basket, as a bonded fitting cannot be replaced.

💦 Water depth and slope

The profile is 100 mm wide with a height of 50 mm and a 2.5 mm wall thickness. This height limits the volume of water held at the bottom of the channel, and therefore the reserve available to the roots if the pump stops: in a nutrient film system, this reserve is almost zero regardless of the channel length. The useful flow rate remains modest, in the order of 1 to 2 litres per minute per channel, just enough to maintain a continuous film without waterlogging the roots.

The standard slope guideline is approximately 1 cm per metre, meaning 2 cm of drop between the two ends of this channel. Place it on supports close enough together, because two metres loaded with mature plants will sag between two widely spaced supports, and check that water flows freely from the far end before installing any plants. A run made up of several channels should be kept under around twelve metres, as beyond that the plants at the far end receive a solution that is already depleted.

🪴 Preparing for planting

A single channel can be put into production once connected to a reservoir, a pump, and a return line, then stocked with rooted plants in the net pots supplied. Plants are prepared separately, around 3 weeks in advance, on an indoor seedling bench. For a line extension, make sure you also have the support needed to hold the slope, and check the level with clean water after each cleaning: a channel resting at an angle is easiest to spot at that moment, before the plants are placed.

If the water comes from a fish pond, mechanical filtration upstream is essential, as a 50 mm deep profile clogs quickly with suspended matter. The pH is then set first to suit the fish and the nitrifying bacteria, around neutral, and you retain the 250 mm spacing for plants that benefit from the nitrogen supplied by the pond. For long-term crops such as strawberries or bushy herbs, the 80 mm deep channel provides more headroom under the lid.

Technical specifications

The essentials

Profile: 100 x 50 mm
Length: 2 m
Wall thickness: 2.5 mm
Material: Food-grade cellular PVC

The slots

Choice of density: 8 or 15 holesThe lid is factory-drilled: the density is chosen at the time of ordering.
Spacing: 250 or 125 mm
Accepted pots: 5 cm net pots
Lid: Removable, pre-drilledIt unclips so you can brush the channel between cycles.

Ends and origin

Terminals: Factory-bondedDrainage on both ends, or one drainage outlet and one end cap.
Origin: Italy

To budget for separately

Pot filling: Sponge, rockwool or clay pebbles
Fitting between two channels: 1 per line junction

4 further specifications are available in the detailed view.

In the box

1 growing channel of 2 m with a 100 x 50 mm profile, or 8 to 16 channels depending on the pack chosen.
1 pre-drilled lid per channel, at the chosen density, with a 5 cm net pot per slot.
The end caps, bonded at the factory in the chosen configuration.

Profile, wall thickness, hole spacing, pots, and end cap configurations taken from the manufacturer's data sheet, growrillahydroponics.com, on 07/10/2026. Slope and flow rate per channel: FAO small-scale aquaponic food production guide (2014).

Two channel profiles

The same principle and the same material. This table compares only the profile and slot density.

The profile is chosen based on the mature plant This channel is the lower of the two, which allows it to accommodate up to 15 plants over 2 m. The questionnaire looks first at the size your plant will reach once fully grown.

	Profile height (mm)	200 mm centres	Maximum number of slots	Spacing chosen at the time of ordering	Spacing	Material	Removable lid	Price
Recommended NFT growing channels 100 × 50 mm, 2 m lengthYour choice	50 mm	No	15	Yes	125 or 250 mm	Food-grade PVC	Yes	29,90 €
NFT growing channels 100 × 80 mm, 1.85 m longYour choice	80 mm	Yes	9	No	200 mm	Food-grade PVC	Yes	52,90 €

NFT growing channels 100 × 50 mm, 2 m lengthRecommended

The profile

Profile height (mm)50 mm

200 mm centresNo

The slots

Maximum number of slots15

Spacing chosen at the time of orderingYes

Spacing125 or 250 mm

Common to both

MaterialFood-grade PVC

Removable lidYes

NFT growing channels 100 × 80 mm, 1.85 m long

The profile

Profile height (mm)80 mm

200 mm centresYes

The slots

Maximum number of slots9

Spacing chosen at the time of orderingNo

Spacing200 mm

Common to both

MaterialFood-grade PVC

Removable lidYes

Manufacturer data sheets, growrillahydroponics.com, retrieved 07/10/2026.

Estimate your
delivery time

A 2 m channel ships in a long parcel that cannot be delivered to a collection point: please arrange home delivery and ensure someone is available to receive it. Packs of 8 and 16 channels are shipped on a pallet. Orders are dispatched from the workshop in Robassomero, near Turin. Exact shipping costs and final delivery times are shown at checkout once your address has been entered. Outside the European Union, import duties and taxes are the recipient's responsibility.

Frequently asked questions

8 questions

6 key questions, 8 in the detailed view

8 holes or 15?

Can the density be changed afterwards?

Which pots fit in the holes?

Are terminals needed on both sides?

What slope and what flow rate?

Does a 2 m channel flex?

Can it be cut shorter?

Will this channel fit an existing system?

Let us talk about your project

A question about this product or your setup? Our team will answer and advise you.

Email us Contact form

Interest-free instalment payments

Offered depending on the cart amount, at checkout.

Delivery in 2 to 15 working days

Depending on the products and shipping sites. Estimate by destination in the estimator on this page.

After-sales service 7 days a week by email or chat

Our team answers all your questions.

Shop responsibly

Become part of the change.

NFT growing channels 100 × 50 mm, 2 m length

The summary