Horticultural LED lighting kit, from 60 x 60 to 150 x 150 cm

Regular price 399,00 €
Regular price Sale price 399,00 €
133,00 € × 3 with no fees

This kit includes one or two SANlight EVO 1.5 LED fixtures, their magnetic dimmer, the mains cable and the suspension hangers. It lights a growing bed, a hydroponic tray or a small grow tent of 60 x 60 to 150 x 150 cm, without a fan and with a full-spectrum white light.

Ref. TK-SANLIGHT-EVO-KIT60·Grow light
Size : 60 x 60 cm, 1 x evo 3-60
Customer support 7 days a week by email
Delivery within 2 to 15 business days
100 % secure payment
Visa Mastercard American Express PayPalCartes Bancaires Apple Pay Shop Pay Bancontact EPS KlarnaMobilePayGoogle Pay BizumSatispay

The summary

  • What you receive: one or two EVO 1.5 light fittings, one dimmer per light, the mains cable and two hanging kits.
  • How to choose: the kit size follows the side of the growing area, from 60 to 150 cm.
  • The crops: lettuce, herbs, tomatoes, peppers and strawberries, from seedling to harvest.
  • The height: 40 cm for a single light, 30 to 50 cm for a pair, above the plants.
  • The climate: from 5 to 30 °C, humid air but no condensation, above the grow bed and not above the fish tank.
  • Installation: one mains socket, two hanging kits, one dimmer to set, no special tools needed.

Complete lighting for a grow bed or indoor vegetable garden, from 0.36 to 2.25 m²

The EVO 1.5 series from the Austrian manufacturer SANlight consists of rectangular LED luminaires built around an aluminium profile that serves as both structure and heat sink. Each luminaire carries three to six rows of diodes, covered with PMMA lenses, a very hard transparent plastic that directs the light downwards and protects the diodes. The kit sold here is a ready-to-plug-in installation: it includes the luminaire(s) sized for a given area, one dimmer per luminaire, the power cable and the hanging kit. You choose the size according to the side length of your growing space, from 60 x 60 cm for a single EVO 3-60 up to 150 x 150 cm for two EVO 5-150.

💡 A grow light without a fan

EVO light fittings emit a white light with a full spectrum, from 400 to 780 nm, combining Seoul Semiconductor white diodes with OSRAM red diodes, with a beam angle of 90 to 112°. Blue keeps plants compact, red supports photosynthesis, flowering and fruit set, and green penetrates deeper into the foliage. The photosynthetic photon flux reaches 545 µmol/s for an EVO 3, 725 µmol/s for an EVO 4 and 915 µmol/s for an EVO 5, and the LED modules exceed 3 µmol/J. Cooling is entirely passive: no part moves, which eliminates noise, fan wear and drawn-in dust.

Salad leaves and herbs

Lettuces, basil or parsley are happy with a reduced intensity on the dimmer, which lowers power consumption.

Tomatoes and peppers

Fruiting vegetables benefit from full power and the red part of the spectrum during flowering and fruit set.

Strawberries

A 60 or 80 cm kit is enough for a planter or a gutter of strawberries grown indoors.

Seedlings and plants

At low intensity, the same lighting raises seedlings before they are transplanted into the grow bed.

📐 Choosing the size of the kit

Each kit matches a square area. For 60 x 60 cm, an EVO 3-60 hung in the centre, 40 cm above the leaves. For 80 x 80 cm, an EVO 4-80, at the same height. From 100 x 100 cm upwards, the kit includes two light fittings placed side by side and tilted 11 degrees outwards, to light the edges better: two EVO 3-100 units 60 cm apart for 100 x 100 cm, two EVO 4-120 units 70 cm apart for 120 x 120 cm, and two EVO 5-150 units 90 cm apart for 150 x 150 cm. A rectangular grow bed is measured by its longest side: a 120 x 80 cm bed fits the 120 cm kit, and the dimmer lets you soften the output if the plants are getting too much.

A timer and a thermometer at the same station

The dimmer sets the intensity, but the lighting duration is best left to a contactor timer, which copes better than a plug-in timer with the inrush current of two LED power supplies, connected between the socket and the kit's cable: 14 to 16 hours a day for leaves, 12 hours for fruiting vegetables in flower. A thermometer and hygrometer placed at leaf height completes the setup: the light fittings are rated for an ambient temperature of 5 to 30 °C, and a plant lit at full power transpires more.

Cable kept dry, sight glass out of the beam

Do not stare at the lights while they are on: the instructions warn of light that is intense for the eyes, with a share of ultraviolet and infrared. Plug the kit into a socket protected by a 30 mA RCD, out of reach of splashes from the tank and from watering, and run the cable through a drip loop before the socket. Always unplug the kit before moving it or cleaning the lenses, and leave 15 cm clear around the heat sinks, which get hot.

☀️ Light according to the crops

A plant responds not only to the intensity of the light, but to the quantity of photons it receives over the whole day, which horticulturists call the daily light integral, or DLI, expressed in moles of photons per square metre per day. The reference values from the controlled environment agriculture group at Cornell University put lettuce between 12 and 17 mol/m² per day, strawberry between 17 and 20, cucumber between 15 and 30, and tomato and pepper between 20 and 30. Seedlings intended for transplanting are content with 10 to 12 mol/m² per day, according to Purdue University. Above 17 mol, lettuce also risks necrosis of the edge of young leaves, which growers call tipburn.

To turn this target into a setting, you multiply the intensity received at leaf level, in µmol/m²/s, by the lighting duration in seconds. A lettuce lit for 16 hours a day thus reaches 17 mol/m² with an average intensity of around 300 µmol/m²/s, whereas a tomato lit for 12 hours needs 460 to 690 µmol/m²/s to receive 20 to 30 mol. The dimmer bridges that gap: the same kit, set low for lettuces and seedlings, goes up to full power when the fruiting vegetables come into production. An EVO 3 light fitting of 545 µmol/s spreads its light over the 0.36 m² of the 60 cm kit, and even though some is always lost at the edges, it leaves a comfortable margin for leafy vegetables.

🎚️ The magnetic dimmer

Each light fitting is connected to an M-Dimmer controller, a small box that you adjust by bringing a magnetic key close to it. It varies the intensity and provides gradual switching on and off, which spares the plants an abrupt change from darkness to full light. Dimming allows a single kit to be adapted to several growth stages: low intensity for seedlings or salad crops, full power for tomatoes in production. It also avoids leaving salad crops under the full power of a kit designed for fruiting vegetables, which lowers energy consumption as a bonus.

🐟 The indoor aquaponics kit

In indoor aquaponics, the lighting is hung above the grow bed filled with clay pebbles or above the gutters, while the fish tank stays in the shade to limit algae. The IP65 rating protects the light fittings against dust and water splashes, and their instructions allow use up to 90% relative humidity, without condensation, which good ventilation ensures in a room where water evaporates continuously. Because the cooling is passive, the heat from the fittings dissipates upwards without blowing onto the plants. Hungry fruiting vegetables, such as tomatoes, get under a 100 or 120 cm kit the intensity that a window cannot give them in winter: the article on growing tomatoes in aquaponics covers the pruning and pollination that go with it.

Light also sets the balance between the fish and the plants. The FAO manual on aquaponics links the growing area to the fish feed ration: 40 to 50 g of feed per day per square metre of leafy vegetables, 50 to 80 g for fruiting vegetables. A bed of 120 x 120 cm, that is 1.44 m² planted with lettuces under the matching kit, is therefore balanced with 58 to 72 g of feed per day, which corresponds to roughly 3 to 7 kg of fish fed at 1 or 2% of their body weight. A well-lit bed grows faster and takes up more nitrate, so you size the lighting, the bed and the tank together, rather than adding light to a system whose fish cannot produce enough to feed the plants.

🔩 Installing the light fittings

Hang each light fitting by its two eyelets, from an anchor point that supports at least 8 kg continuously, and leave 15 cm of clear space all around. A single light goes in the centre, 30 cm from the sides of a 60 cm area and 40 cm from those of an 80 cm area. Pairs are hung 60 cm apart over 100 cm, 70 cm apart over 120 cm and 90 cm apart over 150 cm, 20 to 30 cm from the sides. To tilt them by 11°, hang them by their outer eyelets: the light then reaches the edges of the bed. If you plug several kits into the same socket, have this connection done by an electrician.

📦 What's in the kit

The 60 or 80 cm kit includes one light, while the 100, 120 or 150 cm kit includes two. Each kit comes with one M-Dimmer controller per light, a mains cable (a Y-cable when there are two lights), SANlight hangers rated at 34 kg, two per light, and an instruction leaflet. The lights carry a 3-year warranty, and the LEDs last over 90,000 hours before losing 10% of their output. The contactor timer is sold separately, as is a 60 to 150 cm grow tent if you want to contain the light and humidity.

Technical specifications

Lighting

Output per light
545 to 915 µmol/sEVO 3, 4 and 5, measured from 400 to 780 nm
Module efficiency
More than 3 µmol/J
Spectrum
Full white, 400 to 780 nm
Cooling
Passive, fanless

Light fittings

Length
468 to 1,318 mmFrom the 3-60 to the 5-150
Weight
3.5 to 6.4 kg per light fitting
Feeding
100 to 240 V, 50/60 Hz30 mA residual current device on the circuit
Warranty
3 years

The installation

Surfaces
60 x 60 to 150 x 150 cmOne light fitting up to 80 cm, two beyond that
Height above the leaves
30 to 50 cm40 cm for a single light
Protection
IP65, up to 90% humidityNo condensation on the light fittings
Operating environment
5 to 30 °C

To allow for in addition

Timer
Contactor timerRecommended for kits with two light fittings
Attachment point
Bar or hook on the ceilingTwo points per light fixture, 34 kg allowed per suspension

6 further specifications are available in the detailed view.

In the box

  • 1 or 2 SANlight EVO 1.5 light fittings, depending on the size chosen
  • 1 M-Dimmer magnetic dimmer per light fixture
  • 1 mains cable, Y-shaped for two light fittings
  • 2 SANlight 34 kg suspension kits per light fixture
  • 1 instruction leaflet

Manufacturer's values (EVO 1.5 data sheet, installation size guide, EVO instructions); contents based on the kit sales sheets. Light benchmarks: Cornell CEA group and Purdue University; plant and fish balance: FAO.

Manufacturer and product safety

Information provided under Regulation (EU) 2023/988 on general product safety.

Documents & manuals

SANlight EVO 1.5 data sheet

Output, efficiency, spectrum, dimensions and protection rating of each light fitting, in French and English.

PDF · 704 Ko

Download

Estimate your
delivery time

The kit is dispatched in the original SANlight boxes, from 8 to 20 kg depending on size, from a distributor's warehouse in France. The exact shipping cost is shown in the basket.

Frequently asked questions

12 questions

6 key questions, 12 in the detailed view

You may also like

Daily electronic programmer – timer plug to automate lighting and pump in aquaponics
Daily timer
Regular price 8,90 €
Regular price Sale price 8,90 €

Let us talk about your project

A question about this product or your setup? Our team will answer and advise you.

Interest-free instalment payments

Offered depending on the cart amount, at checkout.

Delivery in 2 to 15 working days

Depending on the products and shipping sites. Estimate by destination in the estimator on this page.

After-sales service 7 days a week by email or chat

Our team answers all your questions.

Shop responsibly

Become part of the change.