Sicce Eko Power pond pump for filter and waterfall, 9,100 to 12,800 L/h
Regular price
¥52,300
Regular price
Sale price
¥52,300
Unit price
/
per
¥17,433 × 3 with no fees
Klarna.
The Sicce Eko Power is a submersible pond pump, designed to feed a filter, a waterfall or a protein skimmer. It draws in particles of up to 6 mm without clogging and runs day and night.
The range has three models, from 9,100 to 12,800 L/h, and the 10.0 and 14.0 are supplied to order.
Customer support 7 days a week by email
Delivery within 2 to 15 business days
100 % secure payment
The summary
- Which model: from 9,100 to 12,800 L/h depending on the pond and the head height.
- Particles: up to 6 mm, without clogging.
- Lead time: the 10.0 and 14.0 are supplied to order.
- Warranty: 3 years, rotor excluded.
Submersible pump for filter, waterfall and skimmer, particles up to 6 mm
In a filtered pond, the pump draws in the waste-laden water at the bottom, pushes it into the filter and returns it via a waterfall or a stream that oxygenates it on the way. An ordinary pump quickly clogs with leaves, sludge and koi droppings. The Sicce Eko Power is designed for this duty: it swallows solid particles of up to 6 mm without clogging and sends them straight to the filter, where they are retained.
🍂 Designed for heavily loaded water
The strainer around the pump has openings of 12 mm on top, 7 mm on the sides and 5 mm underneath: it lets fine sludge through to the filter while stopping leaves and small fish. An electronic safety device protects the motor. The pump must always work submerged, never dry, in water that does not exceed 35 °C. A second inlet lets you connect an additional piece of equipment, such as a surface skimmer or an external filter.
The outlet, which swivels through 360°, takes a 1 1/2 inch ribbed fitting, stepped to suit 50, 38 or 32 mm pipes, with a shut-off valve, an extension and a ball joint. The flow is adjusted by hand, by turning the suction ring, without opening the strainer. The 10 m cable lets you position the pump in the middle of a large pond and bring the connection back out of the water, to a socket protected by a 30 mA residual current device. The warranty is 3 years, rotor excluded.
Eko Power 10.0
This model delivers 9,100 L/h and pumps up to 3.50 m, at 90 W.
Eko Power 12.0
The maximum head rises to 4.50 m, with 11,500 L/h for 110 W.
Eko Power 14.0
The largest model reaches 12,800 L/h and 5 m head, for 125 W.
All three
Each model lets particles through up to 6 mm and comes with a 10 m cable.
A pressure filter for the Eko Power 12.0
The Eko Power sends water and particles of up to 6 mm to a filter, which must be able to retain them. The Sicce Green Reset pressure filter is designed, in its 60 and 100 L versions, for a pump in the 11,500 L/h class, that is the Eko Power 12.0. Its sponges can be washed without opening the tank, and its UV-C lamp controls green water in a pond of 20,000 to 30,000 litres. Because the tank operates under pressure, the filtered water can then continue on to a waterfall set higher up.
📏 Choosing the power
The usual rule of thumb for a fish pond is to pass its entire volume through the filter at least every 2 hours, and every hour for a heavily stocked koi pond. You then need to take the delivery head into account: the stated flow rate is measured at 0 m, and it falls as the head increases, down to zero at the maximum head. Take a 10,000-litre pond whose filter sits 1.50 m above the surface: you need at least 5,000 L/h at that height. The Eko Power 10.0, whose maximum head reaches 3.50 m, still delivers around 5,200 L/h. For a taller waterfall or a koi pond, the 12.0 or the 14.0 leave more margin.
A pond pump runs all season, and its power affects your bill. Running continuously, the Eko Power 10.0 uses about 790 kWh a year and the 14.0 about 1,100 kWh, that is nearly 310 kWh of difference for 35 W. The model that is just sufficient therefore limits the cost, and the suction ring then lets you adjust the flow. Place the pump on a stable support, slightly above the bottom, so that it does not draw in the thickest layer of sludge, and clean the strainer as soon as the flow weakens.
The pump must not be run in a frozen pond. Before the first frosts, take it out of the pond, clean the strainer and the impeller, then store it somewhere frost-free until spring. When you restart it, check the condition of the impeller and the strainer before switching the filter back on. Limescale deposits on the impeller can be removed with vinegar, then rinsed under running water with a soft brush, which restores the pump to its original flow rate.
🌱 In aquaponics
In a garden aquaponic system built around a pond, the Eko Power feeds the mechanical filter, then the grow beds placed above the water level. For a 4,000 litre pond turned over once an hour and beds at a height of 2 m, the Eko Power 10.0 still delivers about 3,900 L/h, and the 12.0 about 6,400 L/h if you want to keep some margin. The guide to koi carp in aquaponics describes this type of system, and the one on building your own aquaponic system shows where to place the pump and the filter in the circuit.
Technical specifications
By model
- Eko Power 10.0
- 9,100 L/h, 3.50 m, 90 W
- Eko Power 12.0
- 11,500 L/h, 4.50 m, 110 W
- Eko Power 14.0
- 12,800 L/h, 5 m, 125 W
- Particles
- Up to 6 mm
Installation
- Fitting
- 1 1/2 inch, stepped 50, 38 and 32 mm
- Outlet
- Adjustable through 360°
- Cable
- 10 m
- Flow rate adjustment
- Suction ring
Safety
- Motor protection
- Electronics
- Water temperature
- 35 °C maximum
- Operation
- Continuous, never dry
- Warranty
- 3 years, rotor excluded
To budget for separately
- Pipe
- Diameter 32 to 50 mm
- Electrical protection
- 30 mA residual current
6 further specifications are available in the detailed view.
In the box
- 1 Sicce Eko Power pump in the chosen model, with its strainer
- 1 stepped fitting with shut-off valve, extension and ball joint
Flow rates, heads, power ratings, fittings and warranty recorded on 10/10/2026 from the manufacturer's instructions and technical data sheets.
Which Eko Power for your pond?
Three power ratings. The pond volume and the height to be cleared decide.
Which model?
One answer, and the table highlights the model that suits you.
| Maximum flow rate (L/h) | Maximum height (cm) | For | Availability | Price | |
|---|---|---|---|---|---|
| Eko Power 10.0Your choice | 9100 L/h | 350 cm | A pond of up to 15 m³ | Made to order | ¥52,300 |
| Recommended Eko Power 12.0Your choice | 11500 L/h | 450 cm | A koi pond or a tall waterfall | Usual timescale | ¥59,500 |
| Eko Power 14.0Your choice | 12800 L/h | 500 cm | A large koi pond | Made to order | ¥63,200 |
Eko Power 10.0
Performance
Maximum flow rate (L/h)9100 L/h
Maximum height (cm)350 cm
ForA pond of up to 15 m³
AvailabilityMade to order
Eko Power 12.0Recommended
Performance
Maximum flow rate (L/h)11500 L/h
Maximum height (cm)450 cm
ForA koi pond or a tall waterfall
AvailabilityUsual timescale
Eko Power 14.0
Performance
Maximum flow rate (L/h)12800 L/h
Maximum height (cm)500 cm
ForA large koi pond
AvailabilityMade to order
Flow rates at zero metres of head, at 230 V.
Help choosing
A question about your pond
Product videos
The Eko Power range of pumps, in English
The Eko Power with the Green Reset filter, in English
Documents & manuals
Eko Power instruction manual
Multilingual manual including French: safety, installation, flow adjustment, rotor maintenance and warranty.
Document not showing? Some publishers block display inside a frame, so open it in a tab.
Estimate your
delivery time
Your estimate
Delivery
Estimated time
It covers preparing your order and then the transit time quoted by the carrier, counted in working days.
It is not a guaranteed delivery date: public holidays, peak periods, customs or a carrier delay can extend it. The exact amount, in your currency, is worked out in the cart once your address is entered.
Delivered to your door by Colissimo or Chronopost, as you choose during checkout. The Eko Power 10.0 and 14.0 are ordered once your order is received: allow a longer delivery time than for an item held in stock. The exact postage cost is shown in the basket.
Frequently asked questions
12 questions
6 key questions, 12 in the detailed view
You may also like
Related articles
Fish
Koi carp in aquaponics
A species whose appetite follows the water temperature directly.
Read the article
Guide
Building your own aquaponic system: the complete guide
Where to position the filter and pump in a home-built circuit, and what flow rate to aim for based on the fish tank volume.
Read the article
Pond
Green water in the pond: five solutions without chemicals
The real causes of green water, and the nitrate and phosphate levels to measure before considering any treatment.
Read the article
Season
Let us talk about your project
A question about this product or your setup? Our team will answer and advise you.
Interest-free instalment payments
Offered depending on the cart amount, at checkout.
Delivery in 2 to 15 working days
Depending on the products and shipping sites. Estimate by destination in the estimator on this page.
After-sales service 7 days a week by email or chat
Our team answers all your questions.
Shop responsibly
Become part of the change.
