Reagent refill for iron Fe test

Regular price 1,300.00 RSD
Regular price Sale price 1,300.00 RSD
433.33 RSD × 3 with no fees

This dropper bottle is the reagent for the iron test, giving approximately 50 measurements. It colours only the iron remaining in solution — the iron your plants can actually take up.

The reading ranges from 0.02 to 1.5 mg/L across nine steps. The two test tubes, the syringe, the comparator block, and the colour chart from your test kit remain in use.

Ref. J2411700·Reagent refill
Customer support 7 days a week by email
Delivery within 2 to 15 business days
100 % secure payment
Visa Mastercard American Express PayPalCartes Bancaires Apple Pay Shop Pay Bancontact EPS KlarnaMobilePay

The summary

The reagent bottle alone, approximately 50 measurements, from 0.02 to 1.5 mg/L of dissolved iron.

Water may have received a great deal of iron yet contain almost none in an absorbable form, because iron that is not protected by a chelate precipitates out. This dropper bottle is the reagent only for the drop-based iron test, and it colours only the portion remaining in solution, the part your roots can actually take up, for approximately 50 measurements.

🌿 Iron that is actually available

Iron is consumed continuously and remains stable in the water for only a limited time, even when combined with a chelate. In a planted aquarium, a level of 0.1 to 0.2 mg/L is already enough for good growth, a heavily planted tank being able to go up to 0.6 mg/L, whereas in seawater you stay below 0.05 mg/L. The vegetable crops of an aquaponic system are more demanding, and the FAO guide to aquaponics aims for around 2 mg/L: to read a value above 1.5 mg/L, the top of the colour chart, you dilute the sample in demineralised water and multiply the reading by the dilution factor. As tap water supplies almost none, your measurement tells you when to top up again, and a value that stays low just after a top-up points to a chelate unsuited to your pH rather than an insufficient dose.

Nine gradations

The colour chart runs from 0.02 to 1.5 mg/L, with graduations that become closer together at the lower end of the scale, where dosing decisions are made.

10 minutes

5 drops into just one of the two 5 ml test tubes, then 10 minutes' rest before reading in the block.

Rinse the test tubes after an ammonium test

Traces of ammonium reagent left in a test tube will give a higher iron reading than the actual value. Rinse both test tubes several times with the water being tested before you start, and set them aside specifically for this test if possible, especially if you are measuring ammonium on the same day.

🍃 Yellow buds and chelates

In aquaponics, fish feed covers the iron needs of crops poorly, so iron is almost always supplied as a chelate chosen according to pH: DTPA suits water close to neutral, EDDHA suits hard water. The deficiency shows first on the buds and young leaves, which take on a yellowish, glassy tint. Our guide to iron deficiency in aquaponics helps you tell it apart from a magnesium shortage, which the magnesium test settles in a single reading.

DTPA chelate for water close to neutral pH

Choose the 11% DTPA chelated iron with this refill if your pH stays close to neutral, since this chelate keeps the iron available to plants up to pH 7.5 without colouring the water. Measure just before the addition, then 24 to 48 hours afterwards, and the difference between the two readings tells you the dose that suits your setup.

💧 A dropper bottle

The reagent is classified Warning, with hazard statements H302, H317 and H319: harmful if swallowed, it may cause an allergic skin reaction and serious eye irritation. Wear gloves if your skin is sensitive and store the bottle tightly closed, in a dry place, at room temperature, in its original packaging. At the recommended rate, one measurement after installation and then one a week, the 50 measurements cover about a year of monitoring, and you add a measurement whenever green algae appear or your plants' growth slows down.

Technical specifications

What the refill contains

Contents
1 dropper bottleFe reagent — hold vertical, tip dry and bubble-free
Measurements
Approximately 505 drops per measurement, for the same volume of reagent as in the original kit
Colour chart range
0.02 to 1.5 mg/LNine graduations: 0.02, 0.05, 0.1, 0.2, 0.4, 0.6, 0.8, 1.0 and 1.5
Target values
0.1 to 0.2 mg/L in a planted water environmentUp to 0.05 mg/L only in seawater. A heavily planted tank can tolerate up to 0.6 mg/L
Manufacturer's reference
JBL 2411700, PROAQUATEST rangeNot to be confused with 2411600, which is the complete test kit
Hazard classification
Please note, single bottleHazard statements H302, H317 and H319. Store in a dry place, at room temperature, lid firmly closed

To budget for separately

Glassware and syringe
Those from the iron testTwo are needed: one receives the reagent, the other remains untreated and serves as a control
Comparator block and colour chart
Those from the iron testThe block slides along the colour chart until the two shades match.

In the box

  • 1 Fe reagent dropper bottle

Reference, EAN code, contents, protocol, number of tests, and hazard statements taken from the JBL data sheet and instruction manual on 07/10/2026. The range and nine-step scale are taken from a photograph of the colour card supplied. Dilution: JBL FAQ.

The bottle alone, or the iron kit?

A single reagent on both sides, and the same number of measurements. What changes is the glassware and the reading optics, which last for years.

Iron is read at the bottom of the scale The first steps on the colour chart read 0.02 and then 0.05 mg/L. Refilling therefore requires a colour chart that still shows clear contrast, plus the block that holds both test tubes.

Reagent bottles (bottles)Possible readings (measurements)Screw-top glass test tubesGraduated syringe for 5 mlGrey comparator blockNine-step colour chartPrice
Recommended
Reagent refill for iron Fe testYour choice		1 bottles50 measurementsNoNoNoNo1,300.00 RSD
Iron Fe water test in dropsYour choice1 bottles50 measurementsYesYesYesYes2,000.00 RSD
Reagent refill for iron Fe testRecommended
What gets used up
Reagent bottles (bottles)1 bottles
Possible readings (measurements)50 measurements
What keeps well
Screw-top glass test tubesNo
Graduated syringe for 5 mlNo
Grey comparator blockNo
Nine-step colour chartNo
Budget
Iron Fe water test in drops
What gets used up
Reagent bottles (bottles)1 bottles
Possible readings (measurements)50 measurements
What keeps well
Screw-top glass test tubesYes
Graduated syringe for 5 mlYes
Grey comparator blockYes
Nine-step colour chartYes
Budget

Contents of the two columns taken from the manufacturer's data sheet and instructions, on 05/09/2026.

Estimate your
delivery time

0.08 kg parcel, dispatched within 48 hours by Colissimo or Chronopost to your home, as you choose at checkout. The bottle is sent in its original packaging. The exact shipping cost is shown in your basket.

Frequently asked questions

6 questions

6 key questions

You may also like

Related articles

Let us talk about your project

A question about this product or your setup? Our team will answer and advise you.

Email usContact form

Interest-free instalment payments

Offered depending on the cart amount, at checkout.

Delivery in 2 to 15 working days

Depending on the products and shipping sites. Estimate by destination in the estimator on this page.

After-sales service 7 days a week by email or chat

Our team answers all your questions.

Shop responsibly

Become part of the change.