Coconut fiber mat
This coir fibre mat can be cut to fit your planters, hanging baskets, and growing troughs. It retains the grow medium, allows water to drain through, and holds moisture — in aquaponics, hydroponics, and the kitchen garden alike — and it can be composted at the end of its life.
7/7 customer service by e-mail
Payment in instalments, free of charge
The summary
- What it is: a coir fibre mat, to be cut to the shape of your container.
- What it does: it retains the grow medium whilst allowing water to pass through.
- Cutting: with scissors or a craft knife, without the edges fraying.
- Before fitting: dampen it first — it becomes pliable and conforms to curved surfaces.
- In aquaponics: placed at the bottom of a grow bed or pot, it holds back fine particles that would otherwise reach the pump.
- At end of life: it can be composted, like any plant material from the garden.
Coco fibre mat to cut to size, for lining a basket or a slatted planter
It is a coco fibre felt, supplied in a roll, which you cut to the shape of your container. It does not replace a grow medium, it forms the lining, between what you are planting and whatever sits behind it.
Hanging basket
The circle is drawn by placing the basket on the felt, then cut out with scissors.
Slatted planter
A strip is cut to length and pressed against the sides before pouring.
Tank base
A component sits at the bottom and holds the grow medium above the drain.
🪣 What a coco fibre wall takes care of
A hanging basket, a slatted planter, or an open-sided trough all allow the grow medium to wash out with every watering. The fleece liner sits between them and solves the problem without blocking drainage. Its interlocking fibres hold the material in place while letting liquid pass through, and the gaps maintain air circulation around the roots. Watering intervals increase because the fibre absorbs and then redistributes moisture, even in a container holding very little grow medium.
🧵 Cutting and installation
Cutting is done with scissors or a craft knife, and the edge doesn't fray, so you can cut to the exact size you need. No specialist tools are required, and a single roll will line several containers of different sizes, keeping offcuts to a minimum. Dampen the felt slightly before fitting, it becomes pliable and follows curved shapes without creasing or cracking. The same approach works in an aquaponic system, where felt placed at the bottom of a growing bed or pot retains fine particles that would otherwise reach the strainer and the pump, while still allowing the nutrient solution to flow freely. Our guide on choosing a grow medium explains why this question of particle migration matters so much.
Felt for the wall, fibre for the volume
In a hanging basket, the liner forms the wall and compacted coco fibre provides the volume in which the roots develop, so both are worth buying together. A handful of clay pebbles at the base improves drainage and prevents the pocket of stagnant water that forms at the lowest point of a deep basket.
Placed dry, and cut too short
Dry liner fabric tears when folded and leaves open corners through which the grow medium escapes, so pre-moistening is not a refinement, it is a necessity. Cut generously too, and leave a few centimetres overhanging the top of the container, trimming back afterwards if needed. The offcuts are useful for filling the corners of a round net pot, where a single piece cannot follow the curve.
⏳ How long it lasts
A coir liner does not last forever, and that is something to factor in from the moment you buy it. Exposed to sunlight and repeated wet-dry cycles, the fibre typically breaks down after two to three seasons in a hanging basket, and slightly faster on a south-facing wall. The first sign is a crumbling top edge that exposes the grow medium, well before the base gives way. There is nothing to stop you doubling the thickness at the most exposed spots, or replacing just the upper ring while keeping the base in place, since the fabric can be cut to any shape.
🌿 Planting through the wall
A hanging basket looks its best when trailing plants spill out from the sides as well, and the liner is no obstacle to this. Cut cross-shaped slits of three to four centimetres at mid-height, once the liner is in place and the container is half filled, then slide the root ball from the outside inwards, protecting it with a paper cone. Press the fibre back around the collar, it naturally springs back and closes the opening. Make these slits before finishing the filling, because trying to plant through the sides of an already-full basket means taking everything out again. Plan for three to five openings evenly spaced around the basket for an even result, and choose trailing species for these positions that will tolerate growing horizontally during the first few weeks.
Technical specifications
The essentials
- Material
- Interwoven coir fibreNo plastic lining or synthetic binder.
- Shape
- Felt on a rollTo be unrolled and cut to size as needed, with no waste.
- Cutting
- Scissors or cutterThe edge does not fray, which allows you to cut as closely as needed.
- Before installation
- A light mistingThe fibre becomes pliable and moulds to curved surfaces without cracking.
To budget for separately
- The grow medium
- Coco, compost or clay pebblesThe felt forms the wall; it does not fill the container.
- The container
- Basket, planter or slatted trayThis is what the felt liner doubles up against.
In the box
- 1 roll of coconut fibre felt, to cut to size
Material, roll packaging, cut stability and moistening before application: values stated by the supplier, recorded on 19/09/2026.
Estimate your
delivery time
Your estimate
It covers preparing your order and then the transit time quoted by the carrier, counted in working days.
It is not a guaranteed delivery date: public holidays, peak periods, customs or a carrier delay can extend it. The exact amount, in your currency, is worked out in the cart once your address is entered.
The felt ships rolled, in a lightweight but long parcel. The exact postage and final delivery times are shown at checkout once you have entered your address.
Frequently asked questions
8 questions
6 key questions, 8 in the detailed view
Vous aimerez aussi
Let us talk about your project
Une question sur ce produit ou votre installation ? Notre équipe vous répond et vous conseille.
Paiement plusieurs fois sans frais
Proposé selon le montant du panier, au moment du paiement.
Livraison sous 5 à 15 jours ouvrés
Selon les produits et sites d'expédition. Estimation par destination dans l'estimateur de cette page.
SAV 7/7 par mail ou chat
Notre équipe répond à toutes vos questions.
Faire un achat engagé
Devenez acteurs du changement.









