Sicce Eko Power pond pump for filter and waterfall, 9,100 to 12,800 L/h

Regular price $330.61
Regular price Sale price $330.61
$110.20 × 3 with no fees

The Sicce Eko Power is a submersible pond pump, designed to feed a filter, a waterfall or a protein skimmer. It draws in particles of up to 6 mm without clogging and runs day and night.

The range has three models, from 9,100 to 12,800 L/h, and the 10.0 and 14.0 are supplied to order.

Ref. SIREP10F·Pond pump
Modèle : 10.0, 9 100 l/h, sur commande
Customer support 7 days a week by email
Delivery within 2 to 15 business days
100 % secure payment
Visa Mastercard American Express PayPalCartes Bancaires Apple Pay Shop Pay Bancontact EPS KlarnaMobilePay

The summary

  • Which model: from 9,100 to 12,800 L/h depending on the pond and the head height.
  • Particles: up to 6 mm, without clogging.
  • Lead time: the 10.0 and 14.0 are supplied to order.
  • Warranty: 3 years, rotor excluded.

Submersible pump for filter, waterfall and skimmer, particles up to 6 mm

In a filtered pond, the pump draws in the waste-laden water at the bottom, pushes it into the filter and returns it via a waterfall or a stream that oxygenates it on the way. An ordinary pump quickly clogs with leaves, sludge and koi droppings. The Sicce Eko Power is designed for this duty: it swallows solid particles of up to 6 mm without clogging and sends them straight to the filter, where they are retained.

🍂 Designed for heavily loaded water

The strainer around the pump has openings of 12 mm on top, 7 mm on the sides and 5 mm underneath: it lets fine sludge through to the filter while stopping leaves and small fish. An electronic safety device protects the motor. The pump must always work submerged, never dry, in water that does not exceed 35 °C. A second inlet lets you connect an additional piece of equipment, such as a surface skimmer or an external filter.

The outlet, which swivels through 360°, takes a 1 1/2 inch ribbed fitting, stepped to suit 50, 38 or 32 mm pipes, with a shut-off valve, an extension and a ball joint. The flow is adjusted by hand, by turning the suction ring, without opening the strainer. The 10 m cable lets you position the pump in the middle of a large pond and bring the connection back out of the water, to a socket protected by a 30 mA residual current device. The warranty is 3 years, rotor excluded.

Eko Power 10.0

This model delivers 9,100 L/h and pumps up to 3.50 m, at 90 W.

Eko Power 12.0

The maximum head rises to 4.50 m, with 11,500 L/h for 110 W.

Eko Power 14.0

The largest model reaches 12,800 L/h and 5 m head, for 125 W.

All three

Each model lets particles through up to 6 mm and comes with a 10 m cable.

A pressure filter for the Eko Power 12.0

The Eko Power sends water and particles of up to 6 mm to a filter, which must be able to retain them. The Sicce Green Reset pressure filter is designed, in its 60 and 100 L versions, for a pump in the 11,500 L/h class, that is the Eko Power 12.0. Its sponges can be washed without opening the tank, and its UV-C lamp controls green water in a pond of 20,000 to 30,000 litres. Because the tank operates under pressure, the filtered water can then continue on to a waterfall set higher up.

📏 Choosing the power

The usual rule of thumb for a fish pond is to pass its entire volume through the filter at least every 2 hours, and every hour for a heavily stocked koi pond. You then need to take the delivery head into account: the stated flow rate is measured at 0 m, and it falls as the head increases, down to zero at the maximum head. Take a 10,000-litre pond whose filter sits 1.50 m above the surface: you need at least 5,000 L/h at that height. The Eko Power 10.0, whose maximum head reaches 3.50 m, still delivers around 5,200 L/h. For a taller waterfall or a koi pond, the 12.0 or the 14.0 leave more margin.

A pond pump runs all season, and its power affects your bill. Running continuously, the Eko Power 10.0 uses about 790 kWh a year and the 14.0 about 1,100 kWh, that is nearly 310 kWh of difference for 35 W. The model that is just sufficient therefore limits the cost, and the suction ring then lets you adjust the flow. Place the pump on a stable support, slightly above the bottom, so that it does not draw in the thickest layer of sludge, and clean the strainer as soon as the flow weakens.

The pump must not be run in a frozen pond. Before the first frosts, take it out of the pond, clean the strainer and the impeller, then store it somewhere frost-free until spring. When you restart it, check the condition of the impeller and the strainer before switching the filter back on. Limescale deposits on the impeller can be removed with vinegar, then rinsed under running water with a soft brush, which restores the pump to its original flow rate.

🌱 In aquaponics

In a garden aquaponic system built around a pond, the Eko Power feeds the mechanical filter, then the grow beds placed above the water level. For a 4,000 litre pond turned over once an hour and beds at a height of 2 m, the Eko Power 10.0 still delivers about 3,900 L/h, and the 12.0 about 6,400 L/h if you want to keep some margin. The guide to koi carp in aquaponics describes this type of system, and the one on building your own aquaponic system shows where to place the pump and the filter in the circuit.

Technical specifications

By model

Eko Power 10.0
9,100 L/h, 3.50 m, 90 W
Eko Power 12.0
11,500 L/h, 4.50 m, 110 W
Eko Power 14.0
12,800 L/h, 5 m, 125 W
Particles
Up to 6 mm

Installation

Fitting
1 1/2 inch, stepped 50, 38 and 32 mm
Outlet
Adjustable through 360°
Cable
10 m
Flow rate adjustment
Suction ring

Safety

Motor protection
Electronics
Water temperature
35 °C maximum
Operation
Continuous, never dry
Warranty
3 years, rotor excluded

To budget for separately

Pipe
Diameter 32 to 50 mm
Electrical protection
30 mA residual current

6 further specifications are available in the detailed view.

In the box

  • 1 Sicce Eko Power pump in the chosen model, with its strainer
  • 1 stepped fitting with shut-off valve, extension and ball joint

Flow rates, heads, power ratings, fittings and warranty recorded on 10/10/2026 from the manufacturer's instructions and technical data sheets.

Which Eko Power for your pond?

Three power ratings. The pond volume and the height to be cleared decide.

Which model? One answer, and the table highlights the model that suits you.

Maximum flow rate (L/h)Maximum height (cm)ForAvailabilityPrice
Eko Power 10.0Your choice9100 L/h350 cmA pond of up to 15 m³Made to order$330.61
Recommended
Eko Power 12.0Your choice
11500 L/h450 cmA koi pond or a tall waterfallUsual timescale$376.37
Eko Power 14.0Your choice12800 L/h500 cmA large koi pondMade to order$399.25
Eko Power 10.0
Performance
Maximum flow rate (L/h)9100 L/h
Maximum height (cm)350 cm
ForA pond of up to 15 m³
AvailabilityMade to order
Eko Power 12.0Recommended
Performance
Maximum flow rate (L/h)11500 L/h
Maximum height (cm)450 cm
ForA koi pond or a tall waterfall
AvailabilityUsual timescale
Eko Power 14.0
Performance
Maximum flow rate (L/h)12800 L/h
Maximum height (cm)500 cm
ForA large koi pond
AvailabilityMade to order

Flow rates at zero metres of head, at 230 V.

Documents & manuals

Eko Power instruction manual

Multilingual manual including French: safety, installation, flow adjustment, rotor maintenance and warranty.

PDF · 1,7 Mo

Download

Estimate your
delivery time

Delivered to your door by Colissimo or Chronopost, as you choose during checkout. The Eko Power 10.0 and 14.0 are ordered once your order is received: allow a longer delivery time than for an item held in stock. The exact postage cost is shown in the basket.

Frequently asked questions

12 questions

6 key questions, 12 in the detailed view

You may also like

Sold out
Pond liner – HDPE or EPDM watertight liner for garden pond and aquaponics
HDPE pond liner
Regular price From $25.05
Regular price $0.00 Sale price From $25.05
Sold out
Pond liner – HDPE or EPDM watertight liner for garden pond and aquaponics
EPDM pond liner
Regular price From $118.86
Regular price $0.00 Sale price From $118.86
Sold out
Raised above-ground fish pond – preformed elevated pond for koi and ornamental fish in the garden
Above-ground fish pond
Regular price From $186.35
Regular price $0.00 Sale price From $186.35

Let us talk about your project

A question about this product or your setup? Our team will answer and advise you.

Interest-free instalment payments

Offered depending on the cart amount, at checkout.

Delivery in 2 to 15 working days

Depending on the products and shipping sites. Estimate by destination in the estimator on this page.

After-sales service 7 days a week by email or chat

Our team answers all your questions.

Shop responsibly

Become part of the change.