720 W horticultural LED light, Compact or Pro

Regular price $250.00
Regular price Sale price $250.00
$83.33 × 3 with no fees

This 720 W LED bar light from Pure Factory lights a large area of vegetables indoors or in a winter greenhouse, up to 1.5 x 1.5 m. Its white Samsung diodes and 660 nm red diodes form a full spectrum, and the built-in dimmer adapts the light to seedlings, salads and tomatoes alike.

Ref. TK-LAZERLITE-720-COMPACT·Grow light
Version : Compact, 2,160 µmol/s
Customer support 7 days a week by email
Delivery within 2 to 15 business days
100 % secure payment
Visa Mastercard American Express PayPalCartes Bancaires Apple Pay Shop Pay Bancontact EPS KlarnaMobilePayGoogle Pay Satispay

The summary

  • What you receive: the pre-assembled light fitting, its built-in power supplies, its mains cable and its hanging kit.
  • How to choose: the Compact for a gentler price, the Pro for 3% more light and a greater number of diodes.
  • The area: a square of 1.5 x 1.5 m, or one large grow bed or two beds side by side.
  • The height: from 30 to 60 cm above the leaves, higher for lettuce than for tomatoes.
  • The control: a dimmer on the housing and a 0-10 V port for an external controller.
  • The climate: IP54 and from -20 to 35 °C, above the grow bed, never above the fish tank.

Large grow light for 1.5 x 1.5 m of vegetables, indoors or in a winter greenhouse

The Lazerlite is the large LED luminaire from the Spanish brand Pure Factory. It takes the form of a square frame 110 cm along each side and less than 5 cm thick, carrying several parallel aluminium bars covered in diodes. The power supplies, two 350 W Letron units on the Pro version, are fixed at the centre of the frame, so there is no separate box to place or hang. The aluminium of the bars serves as both support and heat sink, so you have no fan to maintain and no noise to put up with.

🌈 Two 720 W versions

The two versions you can choose from draw 720 W and light the same area; they differ in the number and efficacy of the diodes. The Compact combines 2,160 Samsung LM281B+ Pro white diodes and 120 red 660 nm diodes, for a flux of 2,160 µmol/s and an efficacy of 3.0 µmol/J. The Pro has 2,340 white and 216 red, for 2,232 µmol/s and 3.1 µmol/J. Red at 660 nm is the wavelength best absorbed by chlorophyll: it supports flowering and fruit set in fruiting vegetables, while the white light feeds the leaves and keeps a light that is pleasant to the eye for observing the crops.

Year-round salads

Lettuces and lamb's lettuce follow one another over 2 m² of grow bed, with the light set to half power and hung high.

Tomatoes and peppers

At full power, the light carries a row of fruiting vegetables through to harvest, even in winter.

Spring plants

From February, a 1.5 m square seedling table produces the vegetable garden's plants under reduced light.

Winter greenhouse

As a supplement to daylight, it lengthens the short days from November to February above the crops.

📐 Height and intensity

The light received by the leaves is measured in µmol/m²/s, and each of your crops has its own needs. Lettuce or basil is satisfied with 200 to 400 µmol/m²/s; a tomato or pepper plant in production makes use of 600 µmol/m²/s and more. The 2,232 µmol/s of the Pro, spread over 2.25 m², would give at most 990 µmol/m²/s if all the light fell on the plants: the intensity actually received stays below that, higher at the centre of the frame than in the corners. For leafy vegetables, therefore, raise the light to around 60 cm and turn the dimmer down to 50%; for fruiting vegetables, lower it to between 30 and 50 cm, the optimal hanging range, without ever going below 20 cm above the tallest leaves.

Switch on and off at the same times

A contactor timer, placed between the socket and the light fitting, keeps the day length steady, because the inrush current of its LED power supplies exceeds what a plug-in timer is built to switch: 14 to 16 hours for seedlings and salad leaves, 12 hours for fruiting vegetables in flower. Ratchet hangers let you raise the frame as the plants grow, so you keep the right distance without unhooking the light.

IP54: splashes, never a jet

The IP54 rating protects the light from dust and splashes, not from a jet of water or from condensation running down the bars. Plug it into a socket protected by a 30 mA RCD, keep the socket, the timer and the cable dry, with a drip loop before the socket, and unplug the light before moving or cleaning it. Let it cool for a few minutes after switching off before touching the bars.

🐟 An aquaponic greenhouse in the short days

An area of 1.5 x 1.5 m corresponds to a large grow bed filled with clay pebbles, or to two one-metre beds placed side by side, above a fish tank set up in a garage, a cellar or a greenhouse. Direct the light towards your plants and leave the tank in the shade: lit water encourages algae, which compete with the fish for oxygen at night. The IP54 rating protects the light fitting from dust and splashes, not from direct watering, and its operating range of -20 to 35 °C suits a greenhouse that is only lightly heated in winter. The article on aquaponics in winter details how to run a greenhouse during the short days.

Under a 1.5 x 1.5 m square, or 2.25 m², the grow bed holds 45 to 56 lettuces spaced 18 to 30 cm apart, or 7 to 11 tomato plants set 40 to 60 cm apart. The fish water must then keep pace: the FAO counts 40 to 50 g of feed per square metre per day for leafy vegetables, and 50 to 80 g for fruiting vegetables, which comes to 90 to 113 g per day for a bed of lettuces and 113 to 180 g for a bed of tomatoes. This lets you match the size of the tank and the number of fish to the area lit by the grow light.

In winter, the natural light in a greenhouse becomes the factor that limits growth, while the fish water continues to supply nitrogen. The Lazerlite then serves as a supplement: switched on early in the morning and at the end of the day, it lengthens the photoperiod and tops up the amount of light the plants receive each day. Leafy crops, which need around 17 mol of light per square metre per day at their optimum, benefit particularly from this boost, since a few hours at half power are enough to close the gap. Actively growing plants also take up more nitrate from the water, which supports the balance of your system during the cold season.

🔥 Heat output and ventilation

A 720 W light fitting gives off almost all of the power it consumes as heat, around 2,460 BTU per hour. Without a fan, this heat is dissipated through the aluminium bars into the air of the room. In a cool greenhouse, it is a welcome boost for both the plants and the water in the tanks; in a closed, well-insulated room, however, the temperature can rise quickly. Ventilate as soon as it exceeds 30 °C around the plants, as the fitting's operating range stops at 35 °C. Take the temperature at foliage height with a thermometer and hygrometer: it is this reading, not the one at the ceiling, that matters for your plants.

⚙️ Dimmer and 0-10 V control

The dimmer built into the frame lets you adjust the intensity from 0 to 100%, and power consumption falls in the same proportion. Two RJ12 sockets, one input and one output, accept a 0-10 V control signal: an external controller can then drive several Lazerlite units linked in series, with the first luminaire passing the setting on to the others. The power supplies accept a voltage of 200 to 277 V, with a power factor above 0.9, which limits the current drawn from your electrical installation. For a large growing bed or a row of tables, you can therefore adjust all the luminaires in a single move.

0 to 100%

The frame's dimmer adjusts the intensity, and power consumption follows.

RJ12 input and output

The two sockets connect several light fittings to a single controller.

200 to 277 V

The power supplies accept all common mains voltages in Europe.

Power factor

It exceeds 0.9, which limits the current drawn on the circuit.

📦 The parcel and the suspension

The box contains the pre-assembled light fitting, power supplies included, its mains cable and a set of hangers. You attach the hangers to the four corners of the frame, then adjust the height before connecting the cable. At 5.5 to 6.8 kg for the Compact and 6.25 kg for the Pro, it hangs easily from a grow tent bar or from the structure of a greenhouse.

Dust the bars from time to time, with the light unplugged and cooled down, using a dry or barely damp cloth, because a film of dust or limescale blocks some of the light. Also check the fixing points and the mains cable each time the frame is raised, especially in a greenhouse where condensation forms overnight. In a greenhouse, finally, keep supplementary lighting for the hours when daylight is lacking, early in the morning and at the end of the day, to limit consumption.

Technical specifications

Lighting

Photosynthetic flux
2,160 or 2,232 µmol/sCompact or Pro
Yield
3.0 or 3.1 µmol/J
LEDs
Samsung LM281B+ Pro and 660 nm red
Lighting angle
120°

The light fitting

Power consumption
720 W
Dimensions
110 x 110 cm, 4.5 to 4.9 cm thick
Net weight
5.5 to 6.8 kg or 6.25 kgCompact or Pro
Protection
IP54, passive coolingSplashes only, never hose-spraying
Power supplies
Built into the centre of the frame2 Letron 350 W blocks on the Pro version
Temperatures
-20 to 35 °CVentilate above 30 °C around the plants

Usage

Illuminated area
Up to 1.5 x 1.5 m
Hanging height
30 to 60 cmNever closer than 20 cm to the tallest leaves
Control
Built-in dimmer, 0-10 V via RJ12Several light fittings can be linked in series
Feeding
200 to 277 VPlugs into a socket fitted with an RCD

To allow for in addition

Timer
Contactor timerSuited to the luminaire's inrush current
Height adjustment
Ratchet hangers

8 further specifications are available in the detailed view.

In the box

  • 1 pre-assembled Lazerlite 720 W light fixture, power supplies built in
  • 1 mains cable
  • 1 set of hangers

Values from the sales sheets of both versions. Light benchmarks by crop: Cornell University CEA group.

Manufacturer and product safety

Manufacturer
The Pure Factory

Information provided under Regulation (EU) 2023/988 on general product safety.

Estimate your
delivery time

The light is sent in its original box, shipped from a distributor's warehouse in France. The exact shipping cost is shown in your basket.

Frequently asked questions

10 questions

6 key questions, 10 in the detailed view

You may also like

Daily electronic programmer – timer plug to automate lighting and pump in aquaponics
Daily timer
Regular price $15.00
Regular price Sale price $15.00

Let us talk about your project

A question about this product or your setup? Our team will answer and advise you.

Interest-free instalment payments

Offered depending on the cart amount, at checkout.

Delivery in 2 to 15 working days

Depending on the products and shipping sites. Estimate by destination in the estimator on this page.

After-sales service 7 days a week by email or chat

Our team answers all your questions.

Shop responsibly

Become part of the change.