Sold out
Fittings for 30 x 30 mm square tube, tee or end cap
Regular price
4,90 €
Regular price
Sale price
4,90 €
Unit price
/
per
| Pièce | Price | Price per unit | vs Élément de support 140 mm, lot de 2 |
|---|---|---|---|
| Élément de support 140 mm, lot de 2 | 4,90 € | 2,45 € | — |
| Insert en T, lot de 2 | 3,90 € | 1,95 € | −20 % |
| Bouchon à lamelles, lot de 4 | 2,90 € | 0,73 € | −70 % |
1,63 € × 3 with no fees
Klarna.
These push-fit fittings for 30 x 30 mm square tube assemble and finish the uprights of a support structure. The T-insert joins three tubes at right angles; the finned end cap closes the end of a tube.
These are the foot components of the GrowStream system, sold in packs of 2 inserts or 4 end caps.
Customer support 7 days a week by email
Delivery within 2 to 15 business days
100 % secure payment
The summary
- What you receive: 2 T inserts or 4 end caps with fins, depending on the bundle chosen.
- The tube: a square tube of 30 x 30 mm external dimension, in PVC or aluminium.
- Assembly: push-fit, no screws or adhesive required.
- Original purpose: legs and cross-members for the hydroponic gutter system.
Clip-together connectors for assembling, repairing, or closing a square-tube support frame
A square-tube frame is held together by its fittings, and a single broken piece is enough to make a whole support unstable. Both pieces slot into a tube with a 30 x 30 mm external cross-section. The T-insert, in black polypropylene, joins three tubes at right angles, and the finned end cap, in black polyethylene, seals the end of an open tube. No tools are required, simply push each piece in by hand or with a rubber mallet.
These are the leg fittings for the hydroponic gutter system, where the white square tubes hold the gutters at a comfortable working height. They also suit any structure you assemble yourself from square tubing of this section, whether that is a tank support, a seedling shelf, or a frame for a growing table. You simply combine the inserts and end caps with tubes cut to the required length, adapting the structure to the space available.
📐 Two components, two roles
The T-insert measures 138 mm long by 84 mm high. Its three branches fit into three tubes, two in line and one at a right angle, forming a cross-piece or the start of a leg. The finned end cap, 30 x 30 mm and 25 mm deep, has flexible fins that press against the inner wall of the tube and hold it in place without adhesive. It protects the floor, prevents an open tube from filling with water or soil, and saves you from a sharp edge at the end of each leg.
Scrubbing the pipes during support maintenance
A cracked insert weakens an entire upright, and the gutter it supports loses its slope, which slows the flow of the solution. If you shut down the drip system to replace the part, take the opportunity to run the 16 mm bottle brush through the connecting pipes, where a biofilm gradually reduces flow rate. You can then restart with a level installation and a clean circuit in a single operation.
Measure the pipe on the outside
These fittings are designed for a square tube measuring 30 x 30 mm on the outside. A tube with a very thick wall may leave too little room for the insert. Check the cross-section and wall thickness of your tube with a calliper before ordering, and do a dry-fit test before final assembly.
T-insert
Black polypropylene, 138 x 84 x 30 mm, three snap-together arms.
Slotted cap
Black low-density polyethylene, 30 x 30 x 25 mm, flexible fins.
Take a 120 x 60 cm seedling bench assembled from square tube, with four legs and a low crossbar on each long side. Two T-inserts connect the crossbars to the legs on one side, then two more on the other side, 4 inserts in total, and 4 end caps close the bottom of the legs. Two packs of inserts and one pack of end caps are therefore sufficient for this frame.
🔨 The assembly
Cut the tube perfectly square and deburr the inside with a file, otherwise the fitting will be forced in and may crack. Push the insert or end cap in by hand first, then finish with a rubber mallet, never a metal hammer. Without adhesive, the structure remains demountable; for a permanent structure, a screw passing through the tube and insert locks the fitting in place.
🌱 Supporting a growing installation
A stable structure keeps your channels at the correct slope and your tanks level, which determines how the solution flows. To fit out the structure, hydroponic growing pots sit in the channels, and the guide on vertical systems presents other ways to organise the space. Check the stability of the structure every season, especially after moving it.
Technical specifications
The T-insert
- Footprint
- 138 x 84 x 30 mm
- Material
- Polypropylene, black
- Weight
- 108 g
- Manufacturing
- France
The slotted cap
- Footprint
- 30 x 30 x 25 mm
- Material
- Low-density polyethylene, black
- Weight
- 15 g
- Manufacturing
- United Kingdom
The tube
- Section
- 30 x 30 mm external
- Assembly
- Snap-fit, no screws
To budget for separately
- System
- The drip system
- Pots
- Growing pots
4 further specifications are available in the detailed view.
In the box
- 2 T inserts or 4 barbed end caps, depending on the pack chosen
Dimensions, materials, weight, origins and use of GrowStream feet noted on 02/10/2026 from the distributor's product sheets and their 2026 price list.
Product videos
Montage d'un système à gouttières de 20 plants
Présentation du système à gouttières GrowStream V2
Documents & manuals
Document not showing? Some publishers block display inside a frame, so open it in a tab.
Estimate your
delivery time
Your estimate
Delivery
Estimated time
It covers preparing your order and then the transit time quoted by the carrier, counted in working days.
It is not a guaranteed delivery date: public holidays, peak periods, customs or a carrier delay can extend it. The exact amount, in your currency, is worked out in the cart once your address is entered.
Parts bundle dispatched by tracked parcel from France. Exact shipping costs and final delivery times are displayed at checkout once your address has been entered. Outside the European Union, import duties and taxes are the responsibility of the recipient.
Frequently asked questions
6 questions
6 key questions
You may also like
Related articles
Guide
How a hydroponic growing tower works
The guide sets out the layout of a vertical system.
Read the article
Seedling
Maintenance
Maintaining your hydroponic tower
The article covers the maintenance of a soilless system.
Read the article
Let us talk about your project
A question about this product or your setup? Our team will answer and advise you.
Interest-free instalment payments
Offered depending on the cart amount, at checkout.
Delivery in 2 to 15 working days
Depending on the products and shipping sites. Estimate by destination in the estimator on this page.
After-sales service 7 days a week by email or chat
Our team answers all your questions.
Shop responsibly
Become part of the change.
